Not exact matches
The Kettleman (right) is designed with the charcoal tray very close to the cooking surface
compared to the Weber (left), which plays into the design
efficiencies and the overall way the Kettleman
uses infrared heat for improving a classic design.
Research performed at the CEU UCH has developed and analysed the
efficiency of different types of inserts,
using bioadhesive polymers with different physicochemical characteristics to
compare them to discover which one could obtain the optimal degree of permeability to administer moxifloxacin.
In situations where consumers must average ratio information, such as
comparing the fuel
efficiency of two cars
using the ratio miles per gallon, they often flub the numbers by incorrectly assuming the mathematic equation to find miles per gallon would be to average the sum of the mileage of both cars and then divide by two, instead of
using a more complex equation needed to accurately
compare ratios.
The researchers
used a measurement known as Disability - Adjusted Life Year, or DALY, to
compare the
efficiency of each approach.
Granular resistive force theory, which considers the thrust provided by the body waves and the drag on the animals» bodies, helped model the locomotion and
compare the energy
efficiency of the limbless snake against that of the four - legged lizard — which doesn't
use its legs to swim through the sand.
The «floating point operation» or «flop» is an incredibly bad unit to
use to
compare the power
efficiency of the...
The team demonstrated that this hybrid device enhances the collection
efficiency of single photons by more than a factor of 10
compared to a single nanocrystal without the antenna, without the need for complex and bulky optical collection systems
used in many other experiments.
Each evaluation study often
uses a different model and / or data set, making it impossible to directly
compare the performance and computational
efficiency of various approaches that simulate the same aerosol process.
Importantly, this greater
efficiency translates to lower muscle activation (measured by EMG), as well as a smaller metabolic cost in the eccentric phase
compared to the concentric phase, when
using the same external force (Bigland - Ritchie & Woods, 1976; Duchateau & Enoka, 2016).
Compare that to
using the same twenty cloth diapers over and over, cleaning them with safe detergent in a high
efficiency washer.
Thus far, I have bleached and washed these jeans twice
using Clorox Plus High
Efficiency Bleach (I made the mistake of
using store brand bleach on one spot and it did not
compare at all).
Key performance indicators are quantifiable measures which can be
used to
compare the
efficiency and success between different individuals in a company as well as different departments within an organization.
The purpose of this paper is to
compare the
efficiency of the Spanish public and publicly - subsidised private high schools
using Data Envelopment Analysis (DEA) fed by the results provided by a
This system offers installation space, weight, and
efficiency advantages
compared to the hang - on system and can be
used in cars and SUVs.
Production of the BD21B rear differential commenced, featuring higher torque capacity and improved durability
compared to conventional differentials and
using multi-row tapered roller bearings and low - viscosity oil, thereby improving the transmission
efficiency and fuel
efficiency
This system results in an improvement in regenerative braking
efficiency compared to a hydraulic booster system
used in other hybrids.
Using CVVT on both camshafts has several advantages when compared to using it only on the intake camshaft including an improvement in performance (increased volumetric efficiency) and fuel economy (reduced pumping loss), and a reduction in hydrocarbon emis
Using CVVT on both camshafts has several advantages when
compared to
using it only on the intake camshaft including an improvement in performance (increased volumetric efficiency) and fuel economy (reduced pumping loss), and a reduction in hydrocarbon emis
using it only on the intake camshaft including an improvement in performance (increased volumetric
efficiency) and fuel economy (reduced pumping loss), and a reduction in hydrocarbon emissions
Using CVVT on both camshafts has several advantages when compared with using it just on the intake camshaft, including a two percent improvement in performance (increased volumetric efficiency), two percent improvement in fuel economy (reduced pumping loss) and a 30 percent reduction in hydrocarbon emiss
Using CVVT on both camshafts has several advantages when
compared with
using it just on the intake camshaft, including a two percent improvement in performance (increased volumetric efficiency), two percent improvement in fuel economy (reduced pumping loss) and a 30 percent reduction in hydrocarbon emiss
using it just on the intake camshaft, including a two percent improvement in performance (increased volumetric
efficiency), two percent improvement in fuel economy (reduced pumping loss) and a 30 percent reduction in hydrocarbon emissions.
For the purposes of this comparison, we're
using the base models of each lineup as we
compare the horsepower, torque and fuel
efficiency ratings of the new Ford Edge and the new Dodge Journey.
In addition, an externally - controlled variable compressor is
used to improve fuel
efficiency when
compared with an internal variable compressor.
Extensive
use of aluminum in key areas saves 76.1 pounds
compared to traditional all - steel construction, providing high strength with lightweight that directly benefits ride, handling, fuel
efficiency, emissions reductions and safety.
Below we
compare the Relative Power
Efficiencies of the OLED Tab S displays with the LCD Apple iPad Air
using data from
Using the information from the seller on current utility expenditures to establish a baseline and
comparing what energy
efficiencies could be incorporated that aren't currently being
used (as would be revealed in the home inspection) can give a homebuyer the necessary, balanced idea of what to anticipate for utility costs.
For its Going From Pump to Plug 2017 report, the UCS analyzed the costs to refuel gas vehicles and to charge electric vehicles in 50 big US cities, and
compared them
using average fuel
efficiencies for both EV and new gas vehicles.
Using carbon - based dyes and with an
efficiency of only 1.5 to 2 percent, the paper - thin cells are not terribly efficient yet - even
compared other higher -
efficiency thin film - type solar cells, the best of which so far can convert up to almost 20 % of sunlight into electricity.
Review and
compare the modeling methods, inputs, and data sources
used in Commission forecasts of
efficiency savings with the Itron Asset Model, a behaviorally - based model dedicated to measuring the impacts of
efficiency programs.
Knowing how tight district budgets are, and how much schools could
use these savings for classroom programming, the Center for Green Schools at USGBC has published a white paper
comparing state legislation that incentivizes energy
efficiency.
In 2006, the European Union (EU), which consists of 27 members, committed to reducing its global warming emissions by at least 20 percent of 1990 levels by 2020, to consuming 20 percent of its energy from renewable sources by 2020, and to reducing its primary energy
use by 20 percent from projected levels through increased energy
efficiency.1 The EU has also committed to spending $ 375 billion a year to cut greenhouse gas emissions by at least 80 percent by 2050
compared to 1990 levels.2 The EU is meeting these goals through binding national commitments which vary depending on the unique situation of a given country but which average out to the overall targets.
It
compares two «races» of the tree and shows that they both increased the water -
use efficiency W, but they distributed the extra carbon differently among different parts of the trees.
For example, some Southeast Asian countries have just recently started to
use coal - fired power plants; but plant
efficiency is only about 32 %, very low
compared with USC, which could raise plant
efficiency up to 45 %.
Coal plants tend to have relatively low thermal
efficiency compared to plants
using combined - cycle technology fueled by natural gas.
ACEEE estimated the bill would save about 2 % of U.S.energy
use in 2020,
compared to about 10 % for a bill with our recommended
efficiency provisions.
Although energy
efficiency can be
used to displace generation and reduce emissions, the AEO 2016 Reference case models achieving Clean Power Plan compliance with only a 3 percent decrease in sales
compared to the future with no Clean Power Plan (see Figure 2).
Completed in 2009, it
uses a so - called ultrasupercritical cycle, which generates steam at very high heat and pressure, boosting the plant's
efficiency to 45 %,
compared with 30 % to 35 % for conventional plants.
Social networking meets energy
efficiency in Facebook app done with Opower and the Natural Resources Defense Council that lets people
compare energy
use to friends and the national average.
If the
efficiency is small
compared to the solar thermal system (or a photovoltaic system), then it would be much better to
use the solar to make electricity.
It's also important to note that fish farming carries an inherent
efficiency benefit -
compared to land - based livestock farming at least - in that fish can
use vertical space in a way that a cow, for example, can't.
Organic light - emitting diode screens are known for having better contrast, deeper blacks and superior energy
efficiency compared to traditional LCDs, which is why Samsung and other manufacturers have
used them for years.
While the performance improvements are notable, they are modest
compared to a 50 % improvement in power
efficiency, which should allow the larger iPhones to last considerably longer than the iPhone 5s and 5c
using similarly - sized battery cells.
Built
using the company's new Bifrost architecture, the 16nm graphics chip is clocked at 850 MHz and offers up to 20 % better energy
efficiency, 40 % better performance density and 20 % external memory bandwidth saving
compared to the Mali - T880 GPU found in the Galaxy S7.
For example, consider
using a high
efficiency furnace that can result in a 40 per cent increase in heat
compared to conventional furnaces.