Sentences with phrase «use wood conditioner»

We did not use wood conditioner and didn't have any trouble with the stain being blotchy.

If you are going to stain the wood after stripping you may want to use a wood conditioner first on the wood before staining.

I just tried this DIY and used a wood conditioner but my stain still bled.

First I went to Sherwin Williams with a sample (shelf) from the entertainment center and a piece of yellow pine and they custom made a stain color for me to match then I used a wood conditioner (made by Minwax) before applying the stain which helped with the splotchiness.

Not exact matches

I have a question, the wood conditioner did you use oil based or water based?

Whip up an inexpensive wood conditioner and sealant to turn a hardwood board into a foodsafe surface they can use to make entertaining easy.

I used Minwax wood conditioner as well and finished with polyurethane.

For the top I used Minwax wood conditioner and Minwax Dark Walnut stain and then some Annie Sloan Pure White chalk paint for the bottom.

I used another chip brush to apply a pre-stain wood conditioner as this agent promotes an even, uniform stain over the wood and helps to avoid streaks and blotches in the stain.

Use primer or wood conditioner as needed.

1 x 4 8 foot 1 x 2 6 foot 17.5 x 17.5 ″ plywood wood glue finishing nails miter saw (can use circular saw if necessary) drill and large drill bit sanding block or sandpaper wood conditioner stain

Sand any rough edges and condition the wood with a pre-stain wood conditioner (I use Minwax) and allow to dry for 2 hours.