Hair wefts are glued to the scalp
using liquid glue and removed with an oil - based solvent.
Not exact matches
The leather starts as a
liquid, and can be poured into any shape or pattern, or even
used as a
glue to bond fabric.
Tao's design
uses tiny gold antennae embedded in a purified silk substrate that can be dunked into
liquids like milk or pasted onto eggs or bananas or other foods
using the silk's own sticky,
glue - like properties.
They
use aquafaba, the
liquid from a can of chickpeas as the «
glue» that bind them together.
Ours were pretty sturdy
using the
glue sticks (after the
glue dried), but I think
liquid glue would increase stability.
For this one we
used orange
liquid water color mixed with the
glue, then completed the recipe.
While the ingredients I
use (
glue and
liquid starch) are technically non-toxic and safe to handle, I don't think it's good practice to allow kids to eat it.
Using the
glue to plug a hole in the pig heart worked so well that the heart still held in
liquid after being inflated and deflated tens of thousands of times.
I
glued that down
using the
Liquid Nails and ammo box weight method from above.
I prefer
glue stick because otherwise you
use too much tape and
liquid glue gets gloppy.
Never thought of
using Elmer's
glue; I was thinking of
using liquid starch.
I
used wood
glue for this step, but you could probably
use the
Liquid Nails here, too.
But I was wondering, did y ’ all end up
using liquid nail
glue on the planks that couldnt be nailed to the joists?
To create a lip for the pictures to rest against, he
used Liquid Nails to
glue a piece of «L» moulding to the 1 × 4 board.
Using Liquid Nails paneling
glue, we attached the beadboard panels to the island.
Next
glued my magnet board to my frame
using liquid nails and let it dry for what felt like forever.
I tacked it down with brad nails and
liquid nails NOTE: I
used a lot of
liquid nails and only a few very strategically placed brads in the top of the counter top, I knew the
glue, the weight of the plywood itself and the trim would hold it in place.
Next, attach the return trim pieces with some
liquid nails then
use tape to hold them in place while the
glue sets.
I
used wood
glue, but as I said before, one of the long dowels already snapped off, so you would probably be better off with gorilla
glue or
liquid nails.
These feet were
glued on
using Liquid Nails.
Quick tip:
Using a
glue stick rather than
liquid glue prevents thin paper board from warping and speeds up drying time.