Car seats that can be installed
using the vehicle seat belts give you more room to work with than car seats installed using a lower latch.
With the i - Size standard it is no longer allowed for safety seats to be installed
using the vehicle seat belts.
The simplicity is easy to fit
using vehicle seat belts.
But with the revolutionary ClickTight Installation System, you can install your child's Convertible Car Seat
using the vehicle seat belt and get a safe, secure and easy installation every time — whether rear - or forward - facing.
So if you choose to install your child's car seat using lower anchors, be sure to check both the car seat user guide and your vehicle owner's manual for the weight limits, and reinstall the car seat
using the vehicle seat belt when your child reaches the limit.
However, even in vehicles equipped with LATCH, parents can still secure the child seat
using the vehicle seat belt and tether.
When children are old enough and large enough to
use the vehicle seat belt alone, they should always use lap and shoulder seat belts for the best protection.
Use a top tether whether
using the vehicle seat belt or the lower anchors, if your vehicle is equipped.
A study done in 2009 found that children ages 4 - 8 using a booster seat saw a 45 % decrease in injury when compared to children of similar ages that only
used a vehicle seat belt.
Instead, the car seat must be installed
using the vehicle seat belt system.
The seat is fastened in place
using the vehicle seat belt.
Not exact matches
Being loaded with innovative features, the Cybex Cloud Q car
seat may seem complicated to
use, but set up is made simple with its quick and easy latch or
vehicle belt installation.
Although the increased
use of
seat belts and car
seats means the number of motor
vehicle injuries and deaths has declined, millions of crashes still occur on U.S. roads every year.
All children whose weight or height exceeds the forward - facing limit for their car
seat should
use a
belt - positioning booster
seat until the
vehicle seat belt fits properly, typically when they have reached 4 feet 9 inches in height and are 8 through 12 years of age.
In order to provide maximum protection and safety for your toddler, this travel system is furnished with open - loop guides for correct
vehicle belt positioning while you're
using it in the backless
belt positioning booster
seat mode.
You can install the Privia into your car with the
vehicles 3 point
belt, or for maximum safety you can install the
seat with isofix connection points
using the Recaro Fix Base (sold separately)
For example — if you're not able to get a secure installation
using the LATCH system, try installing with the
vehicle seat belt and tether.
However, when a child is ready for booster mode, Britax recommends parents
use the following guidelines to ensure the booster
seat and
vehicle seat belt are properly positioned:
In these types of situations, both the lower anchor connectors and
vehicle seat belt may be
used at the same time and the
vehicle lower anchor weight limits do not apply.
The Britax ClickTight Installation System
uses the
vehicle's
seat belt to safely secure car
seats instead of relying on the LATCH system (Lower Anchors and Tethers for Children).
Easy - to -
use Britax exclusive feature that ensures the
vehicle seat belt is properly positioned on your child's hips, minimizing the risk of abdominal injury during a crash.
That means if the combined weight of your child and the car
seat is more than 65 pounds, then the car
seat should be secured
using the
vehicle's
seat belt and tether.
Use an appropriate car
seat for your baby in every type of
vehicle, and attach it securely with a
seat belt or restraint system (like LATCH).
Later, when your child outgrows the harness by height or weight, the combination
seat converts into a booster
seat that
uses the
vehicle's lap and shoulder
belt.
The
belt tensioner ensures extra firm installation of the Joie i - Base when
using the
vehicle's
seat belt, while colour indicators confirm correct installation of the base to your
vehicle.
If you can not get the car
seat installed tightly
using either the
vehicle seat belt or the LATCH system, find a certified child passenger safety technician or a car
seat inspection station by visiting Safe Kids USA.
when
using the
vehicle's
seat belt, while colour indicators confirm correct installation of the base to your
vehicle.
alternative options embrace a removable kid insert for smaller babies, 5 - point harness with 2 - position chest clip, 6 - position headrest with integrated harness adjustment, built - in
belt lock - offs for installation with
vehicle belt, machine - washable
seat pad, and insulated cup holder for
use on either side of the
seat.
British Standards; BS 3254 for adult
seat belts, forward - facing child safety
seats and child harnesses; BS AU185 for booster cushions; BS AU202: Specification for rearward - facing restraint systems for infants, for
use in road
vehicles.
This Baby Elegance car
seat can be secured by a
vehicle's 3 point
seat belt or can be
used with the Baby Elegance isofix base which can be purchased separately safety harness.
If you're
using the
vehicle's lower anchors and the webbing
belt on your child's car
seat to install, that means you must also hook up that top tether.
It allows car
seats to be attached directly to a
vehicle's frame instead of
using the
seat belts to secure them.
Transporter 2 carrycot is installed
using two of your
vehicle seat belts.
As your child grows, you remove the harness and
use your
vehicle's safety
seat belt.
However, most
seats can still be
used with the
vehicle belt alone.
To install this booster in your
vehicle, all you need to do is simply put it on the
seat and
use your car's
belt system as a guide to keep it in place.
Oftentimes, children (and parents) are eager to ditch the harnessed car
seats and begin
using a lighter and easier - to - buckle booster
seat that utilizes the
vehicle seat belt.
The manufacturer recommends
using both the LATCH system and the
vehicle belt with this
seat, which is unusual compared to most guides.
Once your child outgrows the
vehicle or car
seat manufacturer's established limits for the lower anchors, stop
using the lower anchor attachments and reinstall the car
seat using the
vehicle's
seat belt.
If you choose to
use a
seat belt to install your car
seat, pay close attention to how to «lock» your
seat belt according to the
vehicle's owner manual.
Note:
Seat belts — If you install a car safety seat using your vehicle's seat belt, you must make sure the seat belt locks to help get a tight
Seat belts — If you install a car safety
seat using your vehicle's seat belt, you must make sure the seat belt locks to help get a tight
seat using your
vehicle's
seat belt, you must make sure the seat belt locks to help get a tight
seat belt, you must make sure the
seat belt locks to help get a tight
seat belt locks to help get a tight fit.
They do not come with harness straps but are
used with lap and shoulder
seat belts in your
vehicle, the same way an adult rides.
Secure the car
seat using the UAS or the
vehicle seat belt, carefully following the
vehicle manual and the car
seat instructions.
9In Indiana, children weighing more than 40 pounds are permitted to be restrained by a lap
belt if the
vehicle is not equipped with lap and shoulder
belts or if all lap and shoulder
belts other than those in the front
seat are being
used to restrain other children younger than 16.
In some
vehicles, you will need to
use the
vehicle's
seat belt with a locking clip to securely install a forward - facing child
seat.
7In Georgia, children weighing more than 40 pounds are permitted to be restrained in the back
seat of a
vehicle by a lap
belt if the
vehicle is not equipped with lap and shoulder
belts or when the lap and shoulder
belts are being
used by other children who weigh more than 40 pounds.
The goal of this week is to make sure all parents and caregivers are correctly
using the right restraint (rear - facing car
seat, forward - facing car
seat,
belt - positioning booster
seat or
vehicle seat belt) for their children's ages and sizes.
Booster
seats elevate your growing child for proper restraint
using a 5 - point harness or the
vehicle's lap and shoulder
belt.
This lightweight travel system stroller comes with a matching Graco Click Connect 30 infant car
seat, which Consumer Reports rates at 63 % overall with very good marks for Ease of
Use and Fit to
Vehicle with
BELT.
Use either the
vehicle seat belt or the lower anchors of the LATCH system to lock the car
seat into the car.