Use the wood strips to frame the bamboo.
Not exact matches
Like other manufactured products that
use sandwich panel construction to achieve a combination of light weight and strength, turbine blades contain carefully arrayed
strips of balsa
wood from Ecuador, which provides 95 percent of the world's supply.
I've
used it over different paints and
stripped woods now.
I wanted to mix some new with things I already had, so for each place setting I
used the white birch dishes,
striped napkins and
wood chargers that I got from AllModern a couple months ago, french flatware from BirchLane that I got this past spring, and vintage brass candlesticks I already had.
Strips of
wood spline are
used to hold the cane in place.
In the «olden days» I
used to
strip furniture down to the
wood and varythane for protection.
While other little fellows his size would play together in their Seattle neighborhood, he
used to sit by himself in his yard, peeling the bark off of sticks, fascinated by how it
stripped away from the light, pristine
wood inside.
Where the cabin of the old 3.0 CSL was trimmed in
wood, the Hommage
uses only a decorative
strip of
wood on the instrument panel; the rest is constructed entirely out of carbon fibre.
The high - gloss
woods strips, seats with distinctive stitching, and the upholstery
used in add to the allure of the Gran Turismo 3 Series from BMW.
If you're
using natural
wood, make sure all the bark is
stripped from it (you don't want your beardie accidentally eating a piece of
wood) and verify there are no holes that crickets can hide in.
Some rabbit owners make custom baseboard protectors by
using pieces of
wood with hinges that stand up to block the boards, wire and plastic storage cube pieces that snap together and lean up against the wall, short pieces of wooden fence pickets individually attached with removable adhesive pieces (i.e. Command ™
strips) so they can be replaced as needed, and other creative protective options.
Speaker 1: Furring
strips are, well I'm not a construction person, but they're
used, as I understand it, they're
used as like standards on a wall and then you put wallboard on top of them or something like that, don't hold me to this, but they're thin pieces of
wood, they're not heavy like 2 × 4's.
We
used custom - sized
wood panels (connected with hinges to accommodate all the different angles) attached to the moldings via Velcro
strips.
Use your hard
wood strips to create the basis of the frame.
In 1967, Krushenick made a number of large shaped paintings on
wood panel, such as The Red Baron and Steeplechase,
using cartoonish cloud outlines to disrupt brightly
striped linear forms.
John Phillip Abbott develops the font for his text paintings in a loosely based grid format,
using spray paint, stencil techniques and, for the paintings in this exhibition,
strips of
wood glued to the canvas surface.
It also eliminates the need to setup and
strip off the
wood forms that would be a part of
using a conventional footing.
Cores and remnant
wood from
strip bark trees has been
used to construct chronologies from these sites since they were first identified as being of interest more than 50 years ago.
It
uses tambour
wood (usually
strips of
wood bonded to a flexible backer) which slides in grooves on the frame to act as a seat in one position, a table in another.
Yong Ho Ji's life - like sculptures are sleekly muscled with hand - cut rubber
strips, while steel,
wood, soil and styrofoam are
used for custom molds and structural support.
I like to
use Wood Top / Gel Stains because they're thicker, easier to work with than regular stains, and work well OVER an existing
wood finish that has been
stripped back a little.
Here are three examples: 1 Pin it: Secure a
strip of cork to a piece of
wood and
use push - pins to put up paintings, drawings and doodles.
We just carefully removed the glass tile from the two
strips of adhesive tape holding it to the underside of the tabletop, and cut several
wood «fill - it»
strips (available in the fencing section at Home Depot) to
use as a tabletop surface instead.
Love how they
used strips of
wood to re-create their cabinets — why didn't I think of that!?!? The poppy red door is fabulous:O)
For a fresh take on tongue - and - groove panelling, painted
wood strips of varying widths can be attached to the wall
using battens, while mismatched fabrics from the same colour palette are a pretty way to hide under - sink storage.
If you are going to stain the
wood after
stripping you may want to
use a
wood conditioner first on the
wood before staining.
Step 1 -
Use screws to attach a
strip of plywood down the sides of the fireplace, then create a mantel out of MDF or whatever kind of
wood you'd like...
Step 3 -
Use screws to attach your mantel to the cleat and to the
wood strips running down the sides of your fireplace...
We picked up one of the little side tables from Prattville Pickers for $ 8, and gave it a makeover
using more white spray paint and some Miniwax Special Walnut - stained,
wood «fill - it»
strips from Home Depot...
An old doorway has been blocked in
using weathered
wood pallets and creates a corner space for the dining table and chairs.A white - painted dresser has been positioned in a small lobby area that leads out onto the garden and is filled with the owner's collection of blue and white china together with shells and driftwood that have been collected from the beach.In the master bedroom, walls, floor and furniture have been painted in pure brilliant white to give the space a light and airy feel, with a mix of blue and white
striped accessories, patchwork, florals and chambray adding to the coastal theme.The bed has been positioned so that the fabulous view can be enjoyed, while sun streams through the balcony doors and keeps the space warm all year round.
Do you plan to
use it on raw or
stripped wood?
I also sometimes
use a pressure washer to go over
wood pieces that are really gross... this will really
strip it of any unwanted «mung» that may be on a piece that is
wood constructed.
But before we fired up the circular saw and cut out some new shelves, we
used some iron - on melamine edging tape to cover up the exposed particle
wood strip that ran down the center of the unit...
3
Using wood glue and screws, attach a
strip of MDF to each side off the armoire at the bottom so that the top of the
strip is level with the bottom of the front frame of the armoire.
Use repositionable spray adhesive to affix each printed letter to a piece of MDF backed with two one - by one - inch
wood strips.
Use a small level on top of the
wood strip while attaching it to the wall to ensure levelness.
I have learned from past experiences to
use a plastic furniture
stripping knife because if you
use a metal putty knife and are not careful, the metal can nick the
wood and damage it.
They are really light so I am going to
use strips of fabric remnants (of which I have a ton of) to attach to the loop and then glue it all to the back of my thin painted
wood panel.
Oh yeah, the reason I got said dresser was to match an ash bedframe — but it turns out the
wood was too mis - matched to
use a stain, I had to paint it after doing all the work to
strip it to begin with!
CDX plywood
using a compass made from a
strip of scrap
wood.
I am in the process of
stripping and sanding it but I am still undecided on the stain I will
use or if I will leave it in a
stripped, natural
wood state.
When I have a small project I tend to just
use a
strip of masking tape, like I did here.Just be careful that the tape is not super strong because if it is it will be hard to peel off of the vinyl once it's on the
wood.
Recognize the
wood strips I
used on top of the step stool?
Depending on whether or not you want this frame to be permanent or temporary for this art piece,
use acid - free glue (permanent) or double sided tape (temporary) to connect the art and the
wood strips.