Sentences with phrase «vapor deposition process»

Enabled new on site capabilities such as wet only resist / polymeric and residue cleans, low stress metal sputter deposition process, low stress chemical vapor deposition process, spin on polymer planarization techniques, surface enhancement for improved adhesion, surface passivation for improved structural stability during microfabrication.

Inspected cell quality after plasma - enhanced chemical vapor deposition process to ensure color is within defined spectrum grade.

To sidestep the slow production, Cornell University's Jiwoong Park used Mo (CO) 6 or W (CO) 6 as precursors in a chemical vapor deposition process to form films of MoS2 and WS2, respectively, that were only three atoms thick but covered an area of about 65 cm2 (Nature 2015, DOI: 10.1038 / nature14417).

Importantly, the white graphene is produced in a standard atmospheric pressure chemical vapor deposition process, which Stehle and her colleagues believe could easily be scaled up to commercial production volume levels at a reasonable cost.

Not exact matches

At Oakley, Jannard had thrown himself into the creative engineering process, enlisting technologies such as liquid laser prototyping and electron - beam gun - vapor deposition in his quest to make state - of - the - art sunglasses.

As water vapor comes in contact with your cooler swim goggle lenses, it reaches its saturation point, causing water droplets to form during a process known as deposition.

The team's setup combines a roll - to - roll approach — a common industrial approach for continuous processing of thin foils — with the common graphene - fabrication technique of chemical vapor deposition, to manufacture high - quality graphene in large quantities and at a high rate.

Researchers at the Massachusetts Institute of Technology and elsewhere are looking to make graphene using chemical vapor deposition (CVD), an established process that could be readily integrated into microchip fabrication.

Thus, although the conventional graphene fabrication method of chemical vapor deposition is widely used for the large - area synthesis of graphene on copper and nickel films, the method is not suited for silicon microelectronics, as chemical vapor deposition would require a high growth temperature above 1,000 degrees Celsius and a subsequent transfer process of the graphene from the metallic film to the silicon.

It required a pre-fabricated 3 - D mold, a 1,000 - degree Celsius chemical vapor deposition (CVD) process and nearly three hours of heating and cooling.

The scientists synthesized the sponges by a chemical vapor deposition (CVD) process during which the CNTs (multi-walled nanotubes with diameters in the range of 30 to 50nm and lengths of tens to hundreds of micrometers,) self - assembled into a porous, interconnected, three - dimensional framework.

The chemical vapor deposition (CVD) process used to produce graphene industrially is expensive and time consuming.

Combinatorial depositions with intentional and well - controlled continuous gradients in process parameters (composition, temperature, film thickness, nanoparticle size etc): wide range of thin film chemistries in separate chambers (metals, oxides, nitrides, sulfides); physical vapor deposition techniques (sputtering, pulsed laser deposition); different substrates and supports (glass, metals, glassy carbon, etc).

The other method is to grow one new layer on top of the other, using a process called chemical vapor deposition, but different conditions, including heat, pressure or chemical environments are required for each layer to grow.

They are manufactured via chemical vapor deposition into the final product format, eliminating the need for binders or secondary processing steps.

Chrome wheels consist of traditional chrome plating as well as the new process of PVD (Physical Vapor Deposition) Chrome.

Pebble mills it out of stainless steel, and then either gives it a brushed finish for those who want a silver smartwatch, or a matte black finish using a process called physical vapor deposition that's supposedly extra-resilient to scratches.

Key Qualifications - * Award - winning industry leader focused on strategizing successful and innovative Electroforming and E-Beam Vapor Deposition Thin - Film Coating processes and product launches.

Your PVD finished product has undergone a state of the art process known as Physical Vapor Deposition.