Sentences with phrase «wall cavities with»

It's difficult for installers to completely fill a wall cavity with a closed - cell spray foam product.

Not exact matches

Like cavity wall insulation, New Labour opportunism filled an empty space, most of the Left (including the then Labour Party) having failed to come to grips intellectually with changing social conditions.

In effect, the shape of the disk is like the wave function of a quantum particle bouncing around in a cavity with walls at the disk's inner and outer edges.

A new study from The Auk: Ornithological Advances explores how Poland's cavity - nesting Marsh Tits deal with predator attacks and finds that while tactics such as small entrances and solid walls do help, adaptations like this can only take the birds so far.

Jones and Blom say continued UAVSAR monitoring of the area as recently as October 2013 has shown a widening area of deformation, with the potential to affect other nearby storage cavities located near the salt dome's outer wall.

As mentioned above the only way that you are going to increase the thickness of your abdominal cavity wall is by getting stronger and the only way that you are going to get stronger is with progressive resistance.

The building owner should ensure that the building has adequate loft and cavity wall insulation, efficient central heating controls, all old light bulbs have been replaced with low energy lighting and energy saving domestic appliances have been installed.

By implementing energy efficiency measures, e.g. cavity walls, double - glazing, energy efficient boilers and chillers, LED lighting, etc. combined with remote monitoring and control, schools can substantially reduce energy bills and the savings can then be directed to essential building maintenance.

Other methods that have been used include injecting the wall of the abscess with effective antibiotics or other solutions at periodic intervals; packing the cleaned abscess cavity with gauze sponges impregnated with various products such as medical grade honey, 50 % dextrose solution, antibiotics and enzyme products.

The different modes include Double - with two balls to juggle, Cavity - players must free two balls trapped above the walls, and Progressive where the wall slowly descends upon the player.

In an adjoining space, Naama Tsabar installed Closer, a white monolith with an embedded microphone and cello that is played by reaching one's arm inside of the wall cavity, and the black and bordeaux variations of her Robert Morris-esque felt / carbon paintings, which are fitted with guitar strings (and hooked to amps).

The level of vapor control required on the interior side of framed walls with typical fibrous cavity insulation (fibreglass, rockwool, or cellulose) is determined based on DOE climate zone of construction (see climate map).

Substructure blockwork walls with 150 mm cavity, fully filled with insulation, thermal break using two courses of Foamglas Perinsul blocks in inner leaf.

Figure 5: Frame Wall Water Control — For a frame wall «back - up» wall you can use a drainage mat or a draining insulation with no additional air cavWall Water Control — For a frame wall «back - up» wall you can use a drainage mat or a draining insulation with no additional air cavwall «back - up» wall you can use a drainage mat or a draining insulation with no additional air cavwall you can use a drainage mat or a draining insulation with no additional air cavity.

Walls: Plasterboard & skim, 35 mm service cavity, Siga airtightness membrane, PUR Tw55, 140 mm stud with mineral wool, OSB, breather membrane, 50 mm ventilated cavity, outer block rain screen.

The 2x6 advanced wood frame walls are insulated with cavity insulation and rigid insulation on the exterior, and feature vinyl siding.

The 2x6 advanced wood frame walls are insulated with cavity insulation and rigid insulation on the exterior.

The 2x6 advanced wood frame walls are insulated with cavity insulation and feature fiber cement and brick veneer cladding.

An outline of the seminar content includes the history of single leaf masonry in Ireland; the importance of effective insulation; historical problems with single leaf masonry; single leaf versus cavity wall construction; advancements in single leaf masonry — ETICS; aircrete and solid masonry construction; and thin joint technology.

An example would be framed walls with insulation in the cavities along with more insulation (e.g., foam board or mineral wool) on the exterior.

Green Building Store continues to fine tune passive house design and construction techniques with exacting attention to detail, as demonstrated by its latest superinsulated, stone - clad cavity wall house in West Yorkshire.

(above, clockwise from top left) the walls of the eight units at Garville Drive were constructed from traditional concrete - block cavity - walls, with 100 mm of Xtratherm full - fill Cavitytherm board between the inner and outer leafs; Gyproc Airtite Quiet plaster behind 25 mm battens for the internal service cavity prior to installation of plasterboard, with airtightness detailing of key junctions using Siga tapes also visible; 150 mm Paratherm PIR insulation on the flat roof, part of a Moy extensive green roof system; a Kingspan Environmental rainwater harvesting system feeds garden garden taps at the development.

GROUND FLOOR WALLS Before: Brick - block cavity walls with empty 70 mm caWALLS Before: Brick - block cavity walls with empty 70 mm cawalls with empty 70 mm cavity.

1 Oscar Baldry getting down to work in the old newsagent's shop; 2 laying Kingspan and Ecotherm insulation in the ground floor of the old shop; 3 first floor metal web joist detailing, with membrane behind the joists for airtightness; 4 ground floor walls feature 50 mm Xtratherm internal insulation; 5 this is followed inside by an Intello vapour control barrier and a further 25 mm Xtratherm; 6 the new timber frame first - floor twin - stud walls and roof rafters are of a fully breathable construction and full - filled with Warmcel cellulose insulation; 7 holes in the timber - frame where the Warmcel insulation was pumped in; 8 a pro clima Intello membrane on the inside of the first - floor walls and roof; 9 and finally, 50 mm Thermafleece (sheep wool) lined service cavity to the interior.

This, together with the heat recovery ventilation system, the bead insulation installed in the original wall cavity (which keeps the inner wall warm), the repointing of joints, and the sheltered nature of the site, all help to mitigate the risk of interstitial condensation.

The walls included deep cavity walls insulated with dense - packed cellulose (double stud and I - joist), cavity walls with exterior insulation (polyisocyanurate, XPS, and mineral wool), a ccSPF wall (with 2 × 8 studs), and a «datum» or baseline comparison wall (2 × 6 with cavity insulation)...

Secondly, the values are not specific to any construction type, even though the differences in psi - values for the same junction, between externally - insulated masonry, full - fill cavity wall and partial - fill cavity wall with internal insulation, can be very significant.

The walls consist of 1 1/2» XPS rigid insulation and R - 19 cellulose insulation in the stud cavities, with 2» of closed - cell spray foam insulation at the rim joist.

Walls: Oak - framed walls, 22m Cedarwood cladding externally, followed inside by 50 x 25 mm treated battens on 80 mm Gutex woodfibre board, 100 x 44 mm stud filled with 100 mm of Isover Metac mineral wool, 15 mm taped and sealed OSB SIP insulated with 150 mm XPS insulation, and pro clima airtight DM membrane internally with 50 x 25mmm battens for an uninsulated service cavity and 15 mm Gyproc Rigidur board internWalls: Oak - framed walls, 22m Cedarwood cladding externally, followed inside by 50 x 25 mm treated battens on 80 mm Gutex woodfibre board, 100 x 44 mm stud filled with 100 mm of Isover Metac mineral wool, 15 mm taped and sealed OSB SIP insulated with 150 mm XPS insulation, and pro clima airtight DM membrane internally with 50 x 25mmm battens for an uninsulated service cavity and 15 mm Gyproc Rigidur board internwalls, 22m Cedarwood cladding externally, followed inside by 50 x 25 mm treated battens on 80 mm Gutex woodfibre board, 100 x 44 mm stud filled with 100 mm of Isover Metac mineral wool, 15 mm taped and sealed OSB SIP insulated with 150 mm XPS insulation, and pro clima airtight DM membrane internally with 50 x 25mmm battens for an uninsulated service cavity and 15 mm Gyproc Rigidur board internally.

U-value: 0.078 Brick - clad walls: 100 mm facing brick (or 200 mm flint / backing block) external leaf, followed behind by 300 mm cavity fully filled with Isover Hi - Cav 32 glass mineral wool, 100 mm dense block inner leaf and Gypsum Hardwall plaster internally for airtightness.

The cavity walls were insulated with Isover Hi - Cav 32 glass mineral wool insulation and clad with brick, while Cavalok BigBlok insulated cavity closers and Ancon Teplo Tie basalt wall ties eliminate thermal bridging

It was one of the UK's first passive house projects, and the first to be built with a traditional British cavity wall system.

The 2x6 advanced wood frame walls are insulated with cavity insulation and feature a stucco finish.

The inside is completely N2 cavity walls with no transmissive effects from the outside world.

Around here, most homes have solid walls, and the few with cavity wall insulation are still not that great for comfort, carbon emissions or energy bills.

And in the closed case, the radiation is in equlibrium with the Temperature of the materials in the cavity (walls or contained gases or other materials) so Kirchoff's law applies, and the radiation absorbed by any material must match fequency for frequency, and directionally, with what is absorbed by that material.

With older properties we usually lay - out a plan to improve the building envelope first through air sealing (getting rid of drafts and convection within the wall cavities) and, where possible, insulation -LCB- not always straight forward... many old brick buildings have limited insulation options due to the brick requiring heat transfer from inside to drive moisture from the brick -RCB-.

This clever built - in chest of drawers is recessed into the cavity wall and was given an updated look with handles that complement the new decor.