In addition to drawing up those critical construction details, Jay Stuart also drew on his extensive work in the retrofit market with Ecofix to specify external
wall insulation on all units.
Not exact matches
The architects wrote
on their website that the former shelter's 3.6 - foot - thick
walls provide ideal sound
insulation for instruments.
Make sure the home is insulated as well as it can be - loft and cavity
wall insulation can reduce heat loss by up to 40 % meaning you have to have the heating
on less to get the same benefit.
Built with Engineered Wood
on the outside, Western Red Canadian Cedar
on the inside,
wall insulation, double pane glass and weather resistant windows and roof, the Outdoor 5 can withstand the elements.
Most classrooms have flat, hard
walls to post things
on with little sound
insulation between rooms (frequently I had teachers interrupt my learning activity to tell me that we were being too loud), linoleum floors for easy cleaning, the ceiling tiles are rarely «acoustic,» and square configurations to maximize space.
Squirrels can cause extensive damage to attic
insulation or
walls and gnaw
on electrical wires in homes and vehicles,...
I have many many paper books that I have read that I will never read again filling up space
on my
wall only good now for
insulation from the outside environment.
The fourth installment will provide a synopsis of the more expensive heat efficiency upgrades, including duct sealing and in -
wall blown
insulation, while the fifth installment will focus solely
on tips to increase your home's energy efficiency.
There are wads of freebies
on offer from energy providers, from new boilers to loft and cavity
wall insulation.
Most basement
walls are only partially insulated at best, so even improving the
insulation on those
walls to a meager R - 16 value will cut total energy use by about $ 130 a year.
These are hung alternately
on unfinished gypsum and freestanding, aluminum - cladding
walls, built to spec as cross sections of the layers of thermal
insulation and environmental protection needed for new construction.
Using materials such as lumber, drywall,
insulation and plywood, Diiorio assembled partition - like structures only to cut them open and lay the parts
on the floor or lean them against the gallery's actual
walls, emptying his objects of functional purpose.
In the case of schools in areas with cold winters, instead of open areas atop the
walls, rafters would rest
on the
walls, and
insulation (which is cheap) would be installed.
Is anyone seriously proposing to tear off the exterior cedar siding, build out the stud
walls to 2 × 6 or 2 × 8, install
insulation, replace the siding, and build out the wood trim
on 26 windows to match the deeper stud -
wall??
Taking us right from the tire dump and breaking ground, through laying the first course of tires and installing gray water recycling, rainwater catchment and black water treatment, all the way through to applying
insulation, solar panels and mud finishes
on the interior
walls, this video will undoubtedly be a useful resource for anyone wanting to build their own earthship.
The level of vapor control required
on the interior side of framed
walls with typical fibrous cavity
insulation (fibreglass, rockwool, or cellulose) is determined based
on DOE climate zone of construction (see climate map).
You'll need the following pieces of information
on hand:
insulation R - values in your
walls, floor and ceiling height dimensions, and the temperature difference between a cold day and what you want your interior temperature to be.
(clockwise from top left) installation of 150 mm of PIR
insulation to the original ground floor; solar thermal panels
on the upgraded roof supply domestic hot water for the renovated cottage; installation of the Plustherm graphite EPS external
insulation system to the gable
wall; Green Building Store Ultra tripleglazed timber windows set into the external
insulation layer to prevent thermal bridging; the Ultra windows in place prior to the installation of the external
insulation.
U-Value: 0.10 W / m2K
Walls: Weber external render on 100 mm Neopor graphite EPS insulation mechanically fixed to Amvic ICF system, comprising 63 mm Neopor graphite EPS, 150 mm concrete core (200 mm core on retaining walls), 63 mm Neopor EPS, finished inside with 15 mm Gypsum Rigidur boards on 15 mm metal top
Walls: Weber external render
on 100 mm Neopor graphite EPS
insulation mechanically fixed to Amvic ICF system, comprising 63 mm Neopor graphite EPS, 150 mm concrete core (200 mm core
on retaining
walls), 63 mm Neopor EPS, finished inside with 15 mm Gypsum Rigidur boards on 15 mm metal top
walls), 63 mm Neopor EPS, finished inside with 15 mm Gypsum Rigidur boards
on 15 mm metal top hat.
Solar gain could be included in this design by omitting the
insulation on the south side, and cutting in and glazing a solar window in the south
wall of the outer tank, then painting the south
wall of the inner tank black.
NHBC say that «in view of the latest knowledge provided by the Government tests, for ACM cladding in combination with certain types of
insulation,» they will only now accept as demonstrating compliance: the use of materials of limited combustibility for all elements of the cladding systems
on buildings over 18m, or
wall constructions that have been tested.
The construction of the home features specialized hurricane - resistant structural reinforcement and windows for coastal storm conditions, spray foam
insulation in the
wall cavities, rigid foam to eliminate thermal bridging, and a mix of fiber cement and cedar siding
on the exterior for long term durability and low maintenance.
I cringe when I see 10kW systems
on 1970's vintage slump block homes with with single pane glass an no
wall insulation.
The homes are spray foam insulated with R20
insulation on the
walls, ceiling and floors.
The house features: Earth sheltering
on three sides with a carefully designed PAHS style
insulation umbrella that uses the surrounding earth for thermal storage.Passive solar gain through the south triple glazed windows.Active solar through several Trombe
walls integrated into the south wall.An extensive earth tube system that pre-heats incoming fresh air and recovers heat from outgoing stale air.A carefully designed back up wood heating system.Solar water heatingProvisions for solar electricity.The house is located at 45 degrees north latitude and has a serious winter — the total heating bill for the past two winters has been $ 70 worth of wood — about 0.6 cords.
The building's timber
walls are constructed
on thermal block sub
walls, with perimeter
insulation around the inside of the external
walls to help eliminate cold bridging.
The foundation
wall is insulated with unfaced XPS or EPS rigid
insulation on the interior.
I've built a passive solar home, with 12 ″ ICF
walls, and 18 ″ of
insulation in my roof, and looked into photovoltaic solar and windpower, as I have a 2 mile fetch
on a lake, but neither are economically practical even with federal subsidies.
Rigid
insulation with joints taped or sealed is installed
on the interior of the foundation
wall.
The 2x6 advanced wood frame
walls are insulated with cavity
insulation and rigid
insulation on the exterior, and feature vinyl siding.
The 2x6 advanced wood frame
walls are insulated with cavity
insulation and rigid
insulation on the exterior.
Insulation extends to foundations
on both sides of the rising
walls.
The Quinn technical team will be joined by the Sto team at many of the regional seminars for an additional CPD seminar
on external
wall insulation systems.
1 As work progresses
on the foundations, a plate compactor is used to ensure a solid, stable base for the concrete slab; 2 pouring the concrete slab; 3 a cross-section of the
wall build - up showing wet dash finish followed inside by external
insulation, 215 mm solid block
walls, sand - cement plaster and insulated plasterboard internally; 4 airtightness detailing around joist ends; 5 pro clima Intello airtightness system under counter battens to create a service void while minimising airtight layer damage by service penetrations; 6 a parge coat serves as the airtight layer
on the inner face of the single leaf block
walls.
An example would be framed
walls with
insulation in the cavities along with more
insulation (e.g., foam board or mineral wool)
on the exterior.
For a while now, schemes that aim to encourage the mass uptake of home energy upgrades — essential for cutting carbon emissions from our building stock — have tended to fall into two camps: those that focus
on shallow measures like cavity
wall insulation and new boilers, and deep retrofit like the Passive House Institute's Enerphit standard.
Basement
walls: 12.5 mm plaster board with skim finish
on 90 mm Xtratherm XT / TL
insulation,
on treated timber battens,
on Delta PT drainage membrane,
on 300 mm in situ poured concrete substrate, with 100 mm Kingspan Styrozone down to 1m below ground level.
(above, clockwise from top left) the
walls of the eight units at Garville Drive were constructed from traditional concrete - block cavity -
walls, with 100 mm of Xtratherm full - fill Cavitytherm board between the inner and outer leafs; Gyproc Airtite Quiet plaster behind 25 mm battens for the internal service cavity prior to installation of plasterboard, with airtightness detailing of key junctions using Siga tapes also visible; 150 mm Paratherm PIR
insulation on the flat roof, part of a Moy extensive green roof system; a Kingspan Environmental rainwater harvesting system feeds garden garden taps at the development.
His earlier versions of the Perfect
Wall relied mainly
on screwing rigid
insulation to the outside of the structure or using closed cell spray foam.
Question though
on the faced foam
insulation boards... Can you «stack» them to fill your
walls?
The thickness of
walls depends
on the U-values required which in turn is greatly dependant
on the performance of the
insulation, the type of construction (whether concrete or timber frame), overall design, orientation, compactness and so forth.
Cons: the health risks are potentially very high, ALL spray foams contain toxic ingredient Isocyanate (even those that have a percentage of soy and claim to be «eco»), because the material is so rigid closed cell systems tend to develop cracks in the material compromising the insulative envelope, many people
on RV blogs are opening their
walls to remodel and finding a pile of pulverized
insulation in the cavities, if the ratio of parts A and B aren't mixed exactly right, the material can off gas toxic fumes perpetually, a code approved fire barrier must be installed over spray foam in living spaces (such as 1/2» drywall).
Further note that the 3 layers of 2 - inch rigid
insulation are cantilevered over the
wall to take into account the likely possibility of retrofitting exterior continuous
insulation on exterior
wall framing in the future.
1 Oscar Baldry getting down to work in the old newsagent's shop; 2 laying Kingspan and Ecotherm
insulation in the ground floor of the old shop; 3 first floor metal web joist detailing, with membrane behind the joists for airtightness; 4 ground floor
walls feature 50 mm Xtratherm internal
insulation; 5 this is followed inside by an Intello vapour control barrier and a further 25 mm Xtratherm; 6 the new timber frame first - floor twin - stud
walls and roof rafters are of a fully breathable construction and full - filled with Warmcel cellulose
insulation; 7 holes in the timber - frame where the Warmcel
insulation was pumped in; 8 a pro clima Intello membrane
on the inside of the first - floor
walls and roof; 9 and finally, 50 mm Thermafleece (sheep wool) lined service cavity to the interior.
More
on choosing efficient ceiling fans... How to blow cellulose
insulation in existing
walls... Pole mounted PV detailed how - to... New worldwide degree - day tool... Update: Shading effectiveness of overhangs vs solar screen
on windows...
80 mm of upstand of Kore Passive Slab in floor in full contact with 80 mm of Gutex
on outer stud
wall of SIPs in full contact with 35 mm of Gutex
on roof; full wrap of
insulation all around the house.
Rockliner sound
insulation used
on compartment
walls between apartments.
I'm considering a glazed drainback collector design using very cheap materials (PVC pipe and LDPE tubing, mounted
on the house South
wall with no
insulation behind it), but it would not tolerate stagnation temperatures above around 180F.
The foundation
wall is insulated with 2» foil - faced polyisocyanurate rigid
insulation on the interior and the slab is uninsulated.
Walls: Oak - framed walls, 22m Cedarwood cladding externally, followed inside by 50 x 25 mm treated battens on 80 mm Gutex woodfibre board, 100 x 44 mm stud filled with 100 mm of Isover Metac mineral wool, 15 mm taped and sealed OSB SIP insulated with 150 mm XPS insulation, and pro clima airtight DM membrane internally with 50 x 25mmm battens for an uninsulated service cavity and 15 mm Gyproc Rigidur board intern
Walls: Oak - framed
walls, 22m Cedarwood cladding externally, followed inside by 50 x 25 mm treated battens on 80 mm Gutex woodfibre board, 100 x 44 mm stud filled with 100 mm of Isover Metac mineral wool, 15 mm taped and sealed OSB SIP insulated with 150 mm XPS insulation, and pro clima airtight DM membrane internally with 50 x 25mmm battens for an uninsulated service cavity and 15 mm Gyproc Rigidur board intern
walls, 22m Cedarwood cladding externally, followed inside by 50 x 25 mm treated battens
on 80 mm Gutex woodfibre board, 100 x 44 mm stud filled with 100 mm of Isover Metac mineral wool, 15 mm taped and sealed OSB SIP insulated with 150 mm XPS
insulation, and pro clima airtight DM membrane internally with 50 x 25mmm battens for an uninsulated service cavity and 15 mm Gyproc Rigidur board internally.