I poured
water over the entire surface, leaving marks.
Not exact matches
Stir the
water and sugar until they are completely combined, making sure the syrup doesn't burn or get too hot and solidify [Note: I've found this happens when there are bubbles
over the
entire syrup
surface area — so watch for it].
Spray the filling lightly again with
water — it should be speckled
over the
entire surface.
Bright spots in the search for life There is less controversy
over what De Sanctis and her colleagues did not see in their study of the dwarf world's
entire surface:
water.
The drought that is devastating California and much of the West has dried the region so much that 240 gigatons worth of
surface and groundwater have been lost, roughly the equivalent to a 3.9 - inch layer of
water over the
entire West, or the annual loss of mass from the Greenland Ice Sheet, according to the study.
When you have everything in its place bring the
entire container
over to the sink and give it a good drink of
water — consider whether your vessel has drainage holes and if you need to protect the table
surface as well as how much
water the bulbs will rest in.
I ran sand paper
over the
entire piece just to rough up the
surface, wiped it down with
water and bit of mineral spirits, then let it dry before starting.
Penetrating into the sebaceous glands, the active compound is distributed evenly
over the
entire surface of the skin, and now the poison is not going to be washed off with
water, not afraid of changes in temperature and is maintained at the desired concentration at all times until the dog wears a collar against fleas.
It floats on the top of
water bodies containing fresh
water and can take
over the
surface of the
entire body of
water very quickly.
In this setup, we assume a rotating sphere with a homogeneous
surface —
water - saturated; no continents;
surface temperatures prescribed to be uniform
over the
entire sphere.
I ran sand paper
over the
entire piece just to rough up the
surface, wiped it down with
water and bit of mineral spirits, then let it dry before starting.