If you're not opposed to painting them, you can paint
with a Kilz paint to kill the smell.
We primed
with Kilz oil - based spray primer, and painted Sherwin Williams «Grandview» using a paint sprayer.
Yes, I sanded them (just slightly until the shine was gone), then primed
them with Kilz, then painted with ultra white semi gloss paint.
I've seen other posts that suggest a filler, but if you had success covering the grain
with Kilz and a good quality paint, then I'm feeling better about this «painting my kitchen cabinets» idea.
I ripped up the carpet, and painted the sub flooring
with Kilz, but it is so hard to keep clean, and hard on the feet!
Starting
with Kilz and tiles where water damage has already caused the builder paint to peel and expose the poor tape job beneath, I'd move to a fun color of paint to liven up the little space.
It's primed (
with Kilz) and painted with 3 coats of Simply White by Benjamin Moore: Obviously, we still have lots more planks to attach to the wall to finish out the -LSB-...]
Yes, we bought the paint
with KILZ mixed into it, on the recommendation of the fellow at Home Depot.
Yesterday, not only did he paint the newly - uncovered wood ceiling the prettiest pale shade of gray / blue, he also added some wood in the door opening we discovered the other night... And today, he primed the whole wall
with Kilz... Tomorrow, -LSB-...]
It's primed (
with Kilz) and painted with 3 coats of Simply White by Benjamin Moore:
After I had sanded it to death, I wiped it down with mineral spirits and then sprayed
it with KILZ oil - based primer.
It's primed (
with Kilz) and painted with 3 coats of Simply White by Benjamin Moore: Obviously, we still have lots more planks to attach to the wall... [Read More...]
I just taped off the floor and primed everything
with Kilz.
We sprayed the cabinets
with Kilz primer.
For really musty furniture, I like to prime
with Kilz Max first.
However I have noticed a lot of people prime their floors
with Kilz or shellac paint.
• When it is absolutely dry, paint the area
with Kilz or a similar product.
We just went through renovating a cigarette smoker cat spray house (an inherited tenant) and after 3 full scrubbings with TSP, soaking slab and subfloors in vinegar several times over several weeks, then painting subfloors
with Kilz, duct cleaning, etc., it finally seems to be resolved.
I once saw a homeowner prime his paneling
with Kilz, cover it with fiberglass mesh sheets, then skim them with drywall mud, and then finish paint and wallpaper.
It's primed (
with Kilz) and painted with 3 coats of Simply White by Benjamin Moore: Obviously, we still have lots more planks to attach to the wall to finish out the -LSB-...]
Not exact matches
Start
with TSP, follow
with a light sanding and prime
with a product like
KILZ.
Usually, we can seal over smoke in walls & trim
with just
Kilz but for some reason,
Kilz doesn't handle the popcorn or texture as well so we use Coverstain there.
I'm currently trying to paint some headboards and am having difficulty
with the primer (
Kilz) not adhering: -LRB-
Then I go home and mix up a batch of homemade chalk paint
with it, or add a little
Kilz to it to make a custom color, all my own.
Hi Phyllis — If you plan to distress the chalk paint in areas
with sandpaper, you will see the stark white of the
Kilz against the warmer white of the Old White.
We used
kilz primer to prime them, then moonlit snow
with paint and primer, but the knots from the pine are starting to show over time.
Since the
KILZ Complete Coat ™ is a paint & primer - in - one, we just brushed it directly onto the wood, and I'm so pleased
with the finish and how little touch - up was needed after the first coat.
I always use
Kilz primer because that's what I've worked
with before.
We used
Kilz 2 and did two or three coats of primer, sanding lightly
with 400 grit before the first coat of paint.
After a good cleaning
with warm vinegar water, I sprayed a coat of
Kilz primer, which I had tinted as dark as they could make it.
I've read that a lot of people do two coats of
kilz and then paint
with latex, but I think I will give the Olympic a whirl!
First, cover over any of the colored mill printing (you'll know it when you see it)
with a nice coat of the
KILZ primer.
I have filmed commercials and worked
with some amazing brands such as Wayfair, KitchenAid,
KILZ, Magnolia Home, Balsam Hill, Birch Lane, Home Depot, and Joss & Main to name a few.
For the desk, I started
with 2 coats of
Kilz Latex Primer applied
with a foam roller on the large areas and a small paint brush for the fine details.
first I sanded
with 80 grit sand paper then I put a
kilz primer on it.
Soft blue
with violet undertonesThis Delft pottery inspired blue creates a balanced accent for popping colors, perfect for use in... shelvingThe
Kilz Tribute interior paint collection offers the combined properties of both primer and topcoat paint, adding... read more
Deep gray
with charcoal undertonesThis solid gray adds sophistication when combined
with natural lighting, perfect for use in mode... rn style living spacesThe
Kilz Tribute interior paint collection offers the combined properties of both primer and topcoat... read more