Not exact matches
The patent, a 28 - page request for «Systems, Method, and Apparatus for Curing Conductive Paste,» allows Tesla to
bond solar cell - embedded tiles
with an
adhesive that is thermally cured under heat, and enables electrical conductivity between the
bonded materials.
To save energy, the machine operates
with acrylic
adhesive to
bond the labels instead of a hot - melt
adhesive.
Wazoodle says that its DiaperMaker PUL is made
with a liquid
adhesive that melt -
bonds to the fabric.
This film comes
with extra strong
adhesives that allow you to
bond it to a window for many years easily and effectively.
Fashioned out of aluminum extrusions, castings, and pressings and
bonded with aerospace
adhesives, the chassis is remarkably stiff, and gigantic front and rear antiroll bars help keep the car planted under all circumstances.
It is 38 percent stiffer and held together
with more than 120 feet of
adhesive bonding.
Consisting of extruded, pressed and cast aluminium alloy,
bonded together
with aerospace - grade
adhesive, the backbone of the car works collaboratively
with the powertrain and suspension to create an exceptionally responsive driving experience.
The unibody structure has been redesigned
with more than double the percentage of high - strength steel, and any of those elements are
bonded with adhesives that provide a stiffer, quieter structure
with better crash performance.
The individual die - cast, extruded or stamped aluminium elements of the VH platform are
bonded with strong
adhesives and self - piercing rivets to make a lightweight but stiff backbone.
And it's
bonded together
with just over 367 feet of structural
adhesive.
It says that it is «
bonded with aircraft - grade glue — 390 feet of the
adhesive compared
with about 10 feet in the previous model.
To save weight and strengthen the chassis, more aluminum was employed, along
with greater use of
adhesive seam
bonding in place of welding.
It is conceived that the fiber as it is produced naturally in the cotton plant or the tree is made up of many ultimate units, held together by some
adhesive like lignin and if in place of these, commercial steps could be developed whereby a chemical
bond could replace this physical adhesion, the resuit would be a stronger fiber
with greater service life.
«Rather than inserting a timber, which would have created a thermal bridge, we
bonded ply to the insulation
with adhesive, to make what was in effect an on - site constructed SIP.
CLT panels consist of several layers of kiln - dried lumber boards stacked in alternating directions,
bonded with structural
adhesives, and pressed to form a solid, straight, rectangular panel.
He used a product called Parallam, a form of engineered wood made from clipped veneer strands laid in parallel alignment and
bonded with adhesive.
Glulam is layers of wood
bonded together
with adhesive; CLT is layers of wood glued at right angles to one another.
Fabrics and finishes can be
bonded to FlexForm during the molding process, which does away
with the need for glues,
adhesives and fasteners.
Apply iron - on hem tape (I like Heat N
Bond UltraBond Iron - on
Adhesive) to one side of each fabric panel
with the 7/8 ″ seam allowance.