With those peak outputs available higher up in the rev range, the Acura ILX's engine does need to be worked relatively hard in order to extract the most from it — and does sound a bit strained when doing so.
The Turbo S offers a more powerful version of the same engine
with peak outputs of 580hp and 553 lb - ft.
of torque,
with peak outputs coming much earlier in the power band than in previous models.
The H6 is powered by a 2.0 - litre turbo - petrol direct - injection engine
with peak outputs of 145kW at 5200rpm and 315Nm at 2000rpm.
Listen to this: This is a high - powered inverter
with a peak output of 3,200 watts.
It's powerful, too,
with a peak output of 209bhp and a slightly less impressive 184 lb ft maximum torque output developed at a high 5000rpm.
Marking the ultimate evolution of the brand's W12 - engined Continental GT, it's also the most powerful road car the firm has ever made,
with a peak output of 700bhp at 5900rpm.
The battery is rated at 10 kWh,
with a peak output that equates to about 78bhp.
With a peak output of 310 kW (422 hp) and maximum torque of 540 Nm, the SLK 55 AMG outperforms all of its direct competitors.
The refined 2.0 - liter VTEC Turbo engine is obviously the main factor,
with its peak output of 316 hp (320 PS) and maximum torque of 400 Nm (295 lb - ft) being put to good use by the six - speed manual transmission with new lower gear ratios.
A 3.3 - liter, V - 6 is used on top trims
with a peak output of 290 horsepower.
With a peak output of just 322 horsepower and 332 pound - feet of torque, the 2 Series is good enough to make an impression, but not quite to really turn heads.
Under the hood of those versions, performance will be created by a twin - turbocharged, 3.3 - liter, V - 6 engine
with a peak output of 365 horsepower and 376 pound - feet of torque.
On the other side of the equation, is the 3.5 - liter, V - 6 engine
with a peak output of 300 horsepower and 261 pound - feet of torque.
It's the only trim grade to get the turbocharged, 2.0 - liter, four - cylinder engine
with a peak output of 245 horsepower.
All models are equipped with a 1.5 - liter DOHC direct - injected and turbocharged in - line 4 - cylinder engine
with peak output of 174 horsepower in LX, EX and EX-L Navi trims, and 180 horsepower in the Sport and Sport Touring trims which feature a center - mounted dual exhaust system and are designed to benefit from premium unleaded fuel.
Mercedes - AMG A 45 4MATIC, jupiter rot, AMG Night - Paket, AMG Aerodynamik - Paket, AMG 2,0 - Liter - Turbomotor mit 280 kW (381 PS) Höchstleistung und maximalen Drehmoment von 475 Newtonmetern jupiter red, AMG Night package, AMG Aerodynamics package, AMG 2.0 - litre turbocharged engine
with a peak output of 280 kW (381 hp) and maximum torque of 475 newton metres
The Type R's 2.0 - liter DOHC VTEC Turbo ® direct - injected powerplant advances performance on multiple fronts
with a peak output of 306 horsepower at 6500 rpm and 295 lb. - ft.
So there should be three - cylinder petrol engines with somef 100 kW / 136 hp as well as some four - cylinder petrol engine
with a peak output from 141 kW / 192 hp up to 170 kW / 231 hp... So ething like that.
Powered by a 1.5 - liter DOHC direct - injected turbocharged in - line 4 - cylinder
with peak output of 174 horsepower with CVT in LX, EX and EX-L Navi trims, the 2018 Honda Civic Hatchback in Sport and Sport Touring trims climb to 180 HP.
A race - inspired 427 V8 will remain the heart of the car,
with the peak output to come in at 550 horsepower.
All told, the new breathing mods help to liberate approximately 15 horses from the otherwise stock twin - turbo 3.3 - liter V - 6 powerplant,
with peak output coming to around 380 horsepower total.
In simple terms, the V12 Vantage Roadster combined the well known V12 5.9 litre engine
with peak output of 510bhp as already in service in the DBS, DBS Volante and V12 Vantage coupe within the V8 Vantage Roadster compact body to make Aston Martin's most exhilarating open - top sports car.
The SQ5 makes use of a new turbocharged 3.0 - liter V - 6 fitted to the latest S4 and S5,
with peak output rated at 354 horsepower and 369 pound - feet of torque.
With peak output of 272 horsepower (SAE net) at 6,500 rpm and 280 lb. - ft.
With peak output of 272 horsepower and 280 lb. - ft.
With a peak output of 134 bhp and a maximum torque of 162 ft lbs at 1,250 rpm, this engine also ensures sporting performance figures.
Not exact matches
And unlike
with the oil industry, no «fracking» method has been invented yet to extract gold from hard - to - reach areas, though Barrick — the world's largest producer by
output — has been experimenting
with sensors at its Cortez project in Nevada.What Pierre is talking about, of course, is the idea of «
peak gold.»
Output growth across the two sectors has fallen sharply since an 11 - and - a-half year
peak at the start of the year, in line
with a slowdown in order book growth.
Efficiently pulverizes the toughest whole - food ingredients
with a powerful ≈ 3
peak output horsepower motor
Homgeek Electric Meat Grinder and Sausage Maker
With Kibbe Attachement 1200W
Peak Output and 1.608 HP Rated Motor
This grinder is more than capable,
with 3,000 watts of
peak output power.
Let's start
with its steel construction and maximum 1,400 - watt
peak power
output.
This redesign of Alpine's Type - R subwoofers, the Type - S, is an impressive 10» subwoofer
with a 500W
output power and triple that amount in
peak power!
But the target submitted as part of a pending U.N. deal in Paris in December — to reduce emissions 36 percent per unit of economic
output by 2030 compared
with 2005 levels as well as
peak emissions around 2030 — has not stemmed the criticism.
About 3 times the mass of the sun was converted into gravitational waves in a fraction of a second —
with a
peak power
output about 50 times that of the whole visible universe.
Dr. John Garhammer — brilliant mind,
with a terrific understanding of Newtonian mechanics, physics and mathematics and a great deal of experience in training athletes, from Olympic weightlifters to throwers — addressed the important similarities in terms of
peak power
output (a derivative of absolute strength) and rate of force development between Olympic weightlifters, high jumpers, and throwers.
The jump shrug displays highest
peak power
outputs,
peak velocity,
peak joint angular velocities,
peak vertical displacement, and
peak landing forces
with low loads (30 — 40 % of 1RM hang power clean).
Training
with weightlifting derivatives improves weightlifting derivative performance, lower body strength (as measured by 1RM squat and force production),
peak power
output, and vertical jump height.
Enoka (1988) explored hip, knee and ankle joint power
outputs in competitive weightlifters during the first pull and transition phases and reported that joint
peak power
output did not alter
with increasing load at the hip, knee or ankle.
Similarly, Comfort et al. (2013) compared the power clean performed
with 60 — 80 % of 1RM in untrained female athletes and found no differences in
peak power
output within this range of loads.
Peak force and peak power output increase with increasing load, but RFD does
Peak force and
peak power output increase with increasing load, but RFD does
peak power
output increase
with increasing load, but RFD does not.
However, Comfort et al. (2013) compared the power clean, hang power clean, and mid-thigh power clean in untrained female athletes
with 60 — 80 % of 1RM but found no differences in
peak power
output between variations.
In contrast, when comparing the power clean
with the unloaded vertical jump, MacKenzie et al. (2014) reported that
peak GRF was greater in the power clean but
peak power
output was greater in the unloaded vertical jump.
This suggests that light loads in the mid-thigh pull are best for maximising power
outputs, while heavy loads are best for maximising
peak force production, as
with many other weightlifting derivatives.
In a similar study, Suchomel et al. (2013) also found that the jump shrug displayed its greatest
peak power
output and
peak velocity
with the lowest load used (30 % of 1RM hang power clean).
Comfort et al. (2011b) compared the
peak power
output during the power clean, hang - power clean, mid-thigh power clean, and mid-thigh clean pull
with 60 % of 1RM power clean in elite rugby league athletes.
Studies have found that performance in an Olympic lift or a weightlifting derivative is moderate - to - strongly associated
with vertical jump height (Hori et al. 2008; Channell & Barfield, 2008; Loturco et al. 2015) as well as vertical jump power
output (Carlock et al. 2004; Hori et al. 2008: Nuzzo et al. 2008) and vertical jump
peak velocity (Nuzzo et al. 2008).
Peak GRF is routinely always greatest with the heaviest load (80 — 90 % of 1RM), while peak power output is usually highest at a slightly lower load than the maximal load tested (65 — 80 % of 1RM), and RFD is not generally affected by load to any great ext
Peak GRF is routinely always greatest
with the heaviest load (80 — 90 % of 1RM), while
peak power output is usually highest at a slightly lower load than the maximal load tested (65 — 80 % of 1RM), and RFD is not generally affected by load to any great ext
peak power
output is usually highest at a slightly lower load than the maximal load tested (65 — 80 % of 1RM), and RFD is not generally affected by load to any great extent.
They found that the high pull displayed its greatest
peak power
output with 45 % of 1RM hang clean.