Sentences with phrase «wood screws»

Using scraps from your cuts, or whatever you have available, attach one board at the bottom using wood screws.

We used varying sizes of wood screws depending on the depth of the wood being attached.

Simply fix it to the bottom of the post with the two longer wood screws.

You have to supply your own wood screws for this part.

Then screw each hook in place, having decided which order you want the colours, using two small wood screws per hook.

If you would like to make it that strong use wood screws to assemble your ladder.

It was simple enough to install with a pair of wood screws, and I may add some clear silicone to seal the edges, but the install is secure and solid.

I used three # 6 wood screws per side to mount the front of the dryer to the sides, and four screws per side to mount the back.

Next, you can go ahead and secure your tabletop to your table base with wood screws using the pre-drilled pocket holes.

The sculptures are made of different - sized, angled wedges of wood screwed together in diagonally aligned, accordion like cascades.

We used 1-1/2 inch wood screws for this.

Only, its right side extends elegantly outward from the wall like the thick spine of a three - ring binder, revealing bolt - like slabs of painted wood screwed into the interior structure.

Using a drill, attach table to cleat with wood screws from underneath.

B) Attach the top using wood screws through the bottom side of the top of the base.

The nesting box inside the shelter end is an A4 plastic box we bolted to the side of the shelter end frame with more wood screws.

This comes with self - tapping wood screws, but I'd recommend pre-drilling holes with a drill bit to make sure you don't split the wood of the drawers.

Table Saw 1/2 — 1 inch plywood or solid wood Screws 8 Large Screw Eye (I went for a longer set so that the proportions looked right) Letter Stencils Black Crafter's Acrylic Paint DEWALT 18 - Volt Compact Drill / Driver Kit Drill Bit Set

Concrete, moss - covered bark, tempered glass, plaster tiles, grow light, misting system, fans, steel tubing, wood screw drivers.

That way, they just have to use short wood screws to hang stuff up, which reduces the chance that they don't use the right fasteners (like a drywall anchor), which leads to the wall getting beat up less and fewer things falling down.

Once I figured out where I wanted my birds to go, I pre-drilled the holes and screwed the birds in with small wood screws.

Once the sides were done, we used wood screws at the base of the bookcases to attach them even more securely to the 1 × 6 boards.

The included wood screws are all it takes to install the hinges, making every project easy.

We were thinking the same thing easy just some liquid nails and a few sunken wood screws and good to go.

Using wood glue and 2» wood screws attach the top to all 4 legs.

We used molly bolts where we just went into the drywall, and wood screws where we hit studs.

With a few inexpensive materials such as 1x6 pine boards, galvanized wood screws and some paint or polyurethane you can have this birdhouse hanging in your backyard in a few hours.

Pre-drill the screw holes and use a 1» to 1-1/4» wood screw on 1 - 1/2» thick tops (at least 1» of screw should go into the butcher block or wide plank top).

After that, we propped the doors up onto an old wooden crate that was just the right height, and then he used more long wood screws to secure the them to the old board.

My favorite part is the homemade open shelving — just a few pieces of wood I screwed together, painted and then anchored into the wall.

I used the dryer's corners as levels to make sure the legs were at the proper angle and busted out the 1 - inch wood screws to mount them along the sides, not under the dryer.

Attach the flat end to a 4» x 4» treated post cap by driving a 1-1/2» wood screw from the underside of the cap into the dowel to form the trunk of the tree.

Drill four pilot holes sized to wood screws through back of shelf into shelf.

If the professor of Gilligan's Island had ever cobbled together a music box, it might have looked like the device that Tim Hawkinson has mounted on a small table here: An old Coleman Thermos, studded with wood screws, rotates and plucks the blades of steak knives.

DaVinci dressers are constructed with metal insert utilizing lock washers and self - locking nuts instead of wood screws.

Attach the braces using wood screws or brad nails.

Requirements for wood screws and other fasteners - eliminate the use of wood screws that serve as the primary method of attachment on key structural elements; also includes other fastener requirements to address incidents related to loose hardware and poor structural integrity;

Now, use wood screws to attach the bottom and top shelves.

I've discovered that by simply screwing a few crates together with some wood screws and a screwdriver, I could put together functional and really sturdy shelving in a Continue reading...

You can do this with wood screws, wood glue, an electric screwdriver and brackets.

Includes: Outside frame and tunnel, 20 wood screws and 12 washers, Cut - out template, and Installation instructions.Features: Frame is impact and UV - resistant with telescoping option Fits walls 4.75» -7.25» thick Kit allows for easy installation of the Small PetSafe Electro...

Includes: Outside frame and tunnel, 20 wood screws and 12 washers, Cut - out tem...

Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue

Insert four wood screws to securely join boards.

You will need: 1 planting stake (200 cm long) 4 smooth - edged boards of wood (200 cm x 1.8 cm x 10 cm) 24 white cup hooks 14 wood screws 2 wood screws

Thread the machine screw side into cabinet knob and the wood screw side into dowel.

From the bottom, drill a countersink hole and attach using a 1-1/4 ″ wood screw.

Pre-drilling the pilot holes helps your wood screws to grip better and keeps the wood from splitting when you put in the screws.