Sentences with phrase «fuel atomization»
Fuel atomization refers to the process of breaking down fuel into tiny particles or droplets so that it can mix better with air. This helps to achieve a more efficient and effective combustion in engines or furnaces. Full definition
These injectors optimize the fuel spray pattern, and improve fuel atomization for increased fuel mileage and reduced emissions.
hondanews.com
The valves are cut to allow air past even when fully - closed, but since they restrict the cross-sectional area of the intake runners, the velocity of the incoming air is increased, resulting in better fuel atomization in idle and low - engine - speed conditions.
High - level fuel management is ensured by the up to five, 1400 - bar fuel injection processes per cycle that create an extremely fine fuel atomization in the combustion chambers, which have a total displacement of 1248 cm3.
Particularly in the critical post-startup mode, the high - efficiency multi-hole fuel injectors deliver better fuel atomization for lower emissions.
Other changes include lighter pistons; a newly designed, integrated exhaust manifold; and a new, high - pressure direct - injection fuel system for finer fuel atomization.
Higher - pressure direct injection optimizes fuel atomization, allowing for more efficient combustion.
As diesel engine speeds and loads increase, the higher cylinder temperatures after compression of the intake charge result in increased injection and ignition efficiency due to increased fuel atomization.
A new high - pressure fuel pump is fitted, while revised fuel injectors provide improved fuel atomization, allowing for a more controlled, efficient combustion cycle.
These high pressures produce better fuel atomization and allow for more precise fuel delivery than port fuel - injection systems, which in turn improves both performance and efficiency.
High - pressure direct injection optimizes fuel atomization, allowing for more efficient combustion.
This induces swirl of the intake charge which improves air / fuel atomization in the cylinder and allows for a leaner fuel mixture to be used.
At low RPM only one valve on the intake opens fully, promoting combustion chamber swirl and improved fuel atomization.
This enables high power, improved fuel atomization and efficient mixing with the air intake charge.
The multi-hole injector design means that fuel droplet size is reduced for better fuel atomization, resulting in improved cold weather start - up, better fuel economy, lower emissions and higher horsepower.
The Lexus D - 4S dual - injection system has been redesigned, with higher injection pressure of 2,611 psi and improved fuel atomization.